Banner
Home      Log In      Contacts      FAQs      INSTICC Portal
 
Documents

Call for Papers

BIODEVICES is sponsored by INSTICC – Institute for Systems and Technologies of Information, Control and Communication

SCOPE

The purpose of the International Conference on Biomedical Electronics and Devices is to bring together researchers and practitioners from electronics, mechanical engineering, physics and related areas who are interested in developing, studying and using innovative materials, devices and systems inspired by biological systems and/or addressing biomedical requirements. Monitoring and diagnostics devices, sensors and instrumentation systems, biorobotics and prosthetics, micro-nanotechnologies including microfluidics systems and biomaterials are some of the technologies addressed at this conference. The fabrication and evaluation of biodevices, including wearable and implantable devices is also addressed. BIODEVICES encourages authors to submit papers to one of the main topics indicated below, describing original work, including methods, techniques, advanced prototypes, applications, systems, tools or general survey papers, reporting research results and/or indicating future directions. Accepted papers will be presented at the conference by one of the authors and published in the proceedings. Acceptance will be based on quality, relevance and originality. There will be both oral and poster sessions. The proceedings will be indexed by several major international indexers. Special sessions are also welcome. Please contact the secretariat for further information on how to propose a special session.

CONFERENCE TOPICS


  • Bioelectronics
  • Diagnostic Devices
  • Electrocardiography and Heart Monitoring
  • Health Monitoring Devices
  • Imaging and Visualization Devices
  • Implantable Electronics
  • Lab on a Chip and Microfluidic Devices
  • Rehabilitation Technology
  • Biomaterials
  • Wearable and Mobile Devices
  • Wireless Systems and Biotelemetry
  • Biomechanical Devices
  • Biomedical Equipment & Instrumentation
  • Biomedical Metrology
  • Biomedical Sensors
  • Biorobotics
  • Biosensors

BIOSTEC KEYNOTE SPEAKERS

Norbert NouryUniversity of Lyon, France
Anna Maria M. BianchiDepertment of Bioingeneering, Politecnico di Milano, Italy
Robert TurnerNeurophysics, Max Planck Institute for Human Cognitive and Brain Sciences, United Kingdom
Juan Carlos AugustoDepartment of Computer Science, Faculty of Science and Technology, Middlesex University, United Kingdom

PAPER SUBMISSION

Authors can submit their work in the form of a complete paper or an abstract, but please note that accepted abstracts are presented but not published in the proceedings of the conference. Complete papers can be submitted as a Regular Paper, representing completed and validated research, or as a Position Paper, portraying a short report of work in progress or an arguable opinion about an issue discussing ideas, facts, situations, methods, procedures or results of scientific research focused on one of the conference topic areas.

Authors should submit a paper in English, carefully checked for correct grammar and spelling, addressing one or several of the conference areas or topics. Each paper should clearly indicate the nature of its technical/scientific contribution, and the problems, domains or environments to which it is applicable. To facilitate the double-blind paper evaluation method, authors are kindly requested to produce and provide the paper WITHOUT any reference to any of the authors, including the authors’ personal details, the acknowledgments section of the paper and any other reference that may disclose the authors’ identity.

When submitting a complete paper please note that only original papers should be submitted. Authors are advised to read INSTICC's ethical norms regarding plagiarism and self-plagiarism thoroughly before submitting and must make sure that their submissions do not substantially overlap work which has been published elsewhere or simultaneously submitted to a journal or another conference with proceedings. Papers that contain any form of plagiarism will be rejected without reviews.

All papers must be submitted through the online submission platform PRIMORIS and should follow the instructions and templates that can be found under Guidelines and Templates. After the paper submission has been successfully completed, authors will receive an automatic confirmation e-mail.

PUBLICATIONS

All accepted complete papers will be published in the conference proceedings, under an ISBN reference, on paper and on digital support.
SCITEPRESS is a member of CrossRef (http://www.crossref.org/) and every paper on our digital library is given a DOI (Digital Object Identifier).
The proceedings will be submitted for indexation by SCOPUS, Google Scholar, DBLP, Semantic Scholar, EI and Web of Science / Conference Proceedings Citation Index.

IMPORTANT DATES

Conference Date: 21 - 23 February, 2024

Paper Submission: October 26, 2023 (expired)
Authors Notification:
December 5, 2023 (expired)
Camera Ready and Registration:
December 19, 2023 (expired)

Paper Submission: November 22, 2023 (expired)
Authors Notification:
December 22, 2023 (expired)
Camera Ready and Registration:
January 8, 2024 (expired)

Late-Breaking

Paper Submission: December 15, 2023 (expired)
Authors Notification:
January 8, 2024 (expired)
Camera Ready and Registration:
January 15, 2024 (expired)

Workshops
Workshop Proposal: October 20, 2023 (expired)

Doctoral Consortium
Paper Submission: December 21, 2023 (expired)
Authors Notification: January 9, 2024 (expired)
Camera Ready and Registration: January 17, 2024 (expired)

Special Sessions
Special Session Proposal: October 23, 2023 (expired)

Tutorials
Tutorial Proposal: January 12, 2024 (expired)

Demos
Demo Proposal: January 12, 2024 (expired)

Panels
Panel Proposal: January 12, 2024 (expired)

SECRETARIAT

BIODEVICES Secretariat
Address: Avenida de S. Francisco Xavier, Lote 7 Cv. C
             2900-616 Setúbal - Portugal
Tel.: +351 265 520 185
Fax: +351 265 520 186
e-mail: biodevices.secretariat@insticc.org
Web: https://biodevices.scitevents.org

VENUE

Our event will take place at the Barceló Aran Mantegna Hote Hotel, strategically located in the city of Rome due to the proximity with the city center and the International Airports Fiumicino and Ciampino.

BIOSTEC CONFERENCE CO-CHAIRS

Ana FredInstituto de Telecomunicações and Instituto Superior Técnico (University of Lisbon), Portugal
Hugo GamboaLIBPhys, Physics Department, Nova School of Science and Technology, Nova University of Lisbon, Portugal

PROGRAM CHAIR

Maria Pedro GuarinoHealth Sciences, Polytechnic University of Leiria, Portugal

PROGRAM COMMITTEE MEMBERS

Carlos Abreu, Escola Superior de Tecnologia e Gestão, Instituto Politécnico de Viana do Castelo, Portugal
Tuncay Alan, Monash University, Australia
Azam Ali, Centre for Materials Science & Technology (Department of Applied Sciences), University of Otago, New Zealand
Pedro Alpuim, Physics, Universidade do Minho, Portugal
Paulo Antunes, Physics, Aveiro University and i3N, Portugal
Pablo Aqueveque, Electrical Engineering Department, University Of Concepcion, Chile
Manish Arora, Product Design and Manufacturing, Indian Institute of Science, India
Aparecido A. Augusto de Carvalho, Electrical Engineering, São Paulo State University, Brazil
Antonio Jesus Banegas-Luna, Universidad Católica San Antonio de Murcia, Spain
Ayan Banerjee, Arizona State University, United States
Steve Beeby, ECS, University of Southampton, United Kingdom
Tarun Kanti Bhattacharyya, Indian Institute of Technology Kharagpur, India
Luigi Bianchi, University of Tor Vergata, Rome, Italy
Mahdi Bodaghi, Department of Engineering, Nottingham Trent University, United Kingdom
Alberto Botter, Polytechnic University of Turin, Italy
Gabriele Candiani, Dept. of Chemistry, Materials, and Chemical Engineering "Giulio Natta", Polytechnic University of Milan, Italy
Vanessa Cardoso, Center for MicroElectromechanical Systems (CMEMS-UMinho), University of Minho, Portugal
João Cardoso, Physics, University of Coimbra, Portugal
Eric Chappel, Microsystems, Debiotech SA, Switzerland
Mostafa Charmi, Electrical Engineering, University of Zanjan, Iran, Islamic Republic of
Chaoyang Chen, Wayne State University, United States
Cheng-Hsin Chuang, National Sun Yat-Sen University, Taiwan, Republic of China
Youngjae Chun, 1034 Benedum Hall, University of Pittsburgh, United States
Yindar Chuo, Engineering Science , Simon Fraser University School, Canada
Alberto Cliquet Jr, Electr.Engr. & Orthopedics, University of São Paulo & University of Campinas, Brazil
Willy Colier, Artinis Medical Systems, Netherlands
Paulo C. Cortez, Department of Teleinformatics Engineering (DETI), Federal University of Ceará, Brazil
Frank Nelson Crespilho, University of São Paulo, Brazil
Gerard Cybulski, Warsaw University of Technology, Poland
Carmelo De Maria, University of Pisa, Italy
Tohid Didar, McMaster University, United States
Franco Docchio, Dept. Mechanical and Industrial Engineering, Università degli studi di Brescia, Italy
George S. Dulikravich, Mechanical and Materials Eng., MAIDROC, Florida International University, United States
Maria Evelina Fantacci, Department of Physics, University of Pisa and INFN, Italy
Mireya Fernández Chimeno, Departament d'Enginyeria Electrònica, Universitat Politècnica de Catalunya, Spain
Rui Fonseca-Pinto, ciTechCare - Medical Engineering, Polytechnic University of Leiria, Portugal
Gionata Fragomeni, University of Magna Graecia, Italy
Ugo Galvanetto, Industrial Engineering, University of Padua, Italy
Francisco Gamiz, Nanoelectronics, University of Granada, Spain
Miguel A. García Gonzalez, Electronic Engineering Department, Universitat Politècnica de Catalunya, Spain
Javier Garcia-Casado, Centro de Investigación e Innovación en Bioingeniería, Universitat Politècnica de València, Spain
Gianluca Gatti, Department of Mechanical, Energy and Management Engineering - DIMEG, University of Calabria, Italy
Alessio Gizzi, Campus Bio-Medico University of Rome, Italy
Henrique Leonel L. Gomes, Electrical Engineering and Computers, Universidade de Coimbra, Portugal
Weihua Guan, EE & BME, Penn State University, United States
Evin Gultepe, Independent Researcher, United States
Raj K. Gupta, Physics, Birla Institute of Technology and Science, Pilani, India
Tibor Hianik, Nuclear Physics and biophysics, Comenius University, Slovak Republic
Dietmar W. Hutmacher, Science and Engineering Faculty, School of Chemistry Physics and Mechanical Engineering, Queensland University of Technology, Australia
Ivan E. Ivanov, Advanced Control Systems Laboratory, Technical University Sofia, Bulgaria
Liudi Jiang, School of Engineering - University of Southampton, United Kingdom
Kourosh Kalantar-Zadeh, School of Chemical Engineering, University of New South Wales, Australia
Mehrdad Khakbiz, University of Tehran, Iran, Islamic Republic of
Alicia Koontz, Human Engineering Research Laboratory, University of Pittsburgh, United States
Yaroslav Korpan, Department of Bimolecular Electronics, Institute of Molecular Biology and Genetics NAS of Ukraine, Ukraine
Dean Krusienski, Biomedical Engineering Department, Virginia Commonwealth University (VCU), United States
Hiroshi Kumagai, Allied Health Sciences, Kitasato University, Japan
Dinesh Kumar, Electrical And Computer Engineering, RMIT University, Australia
Rui Lima, Mechanical Eng. Dep., Universidade do Minho, Portugal
Thurmon Lockhart, Independent Researcher, United States
Nicola Francesco Lopomo, Dipartimento di Design, Politecnico di Milano, Italy
Luyao Lu, the George Washington University, United States
Mai S. Mabrouk, Biomedical Informatics, School of Information Technology and computer Science (ITCS), Nile University, Egypt
Ana Isabel I. Martins, Av. Nossa Sra da Alegria n6, 2andar, Universidade de Aveiro, Portugal
Carlo Massaroni, Dept Faculty of Engineering, University Campus Bio-Medico di Rome, Italy
Enzo Mastinu, BioRobotics Institute, Scuola Superiore Sant'Anna, Italy
Anca Mazare, Friedrich-Alexander University Erlangen-Nuernberg, Germany
Sabina Merlo, University of Pavia, Italy
Simona Miclaus, Communications, IT & Cyber Def., Nicolae Balcescu Land Forces Academy, Sibiu, Romania
Abdolmajid B. Moghaddam, NSTRC & University of Tehran, Iran, Islamic Republic of
Ana Moita, Mechanical Engineering, IN+ - Instituto Superior Tecnico and Academia Militar, Portugal
Pedro Morouço, Polytechnic University of Leiria, Portugal
Robert W. Newcomb, Electrical and Computer Engineering, University of Maryland, United States
Helcio B. Orlande, POLI/COPPE Federal University of Rio de Janeiro, Brazil
Abraham Otero, Escuela Politécnica Superior, Universidad San Pablo CEU, Spain
Zafer Ziya Öztürk, Physics, Gebze University Of Technology, Turkey
Laura Papaleo, Laboratoire de Recherche en Informatique, Université Paris Sud, France
Anna-Maria Pappa, University of Cambridge, United Kingdom
Ji-Ho Park, Independent Researcher, Korea, Republic of
Onur Parlak, Department of Medicine, Solna, Karolinska Institute, Sweden
Sotiris Pavlopoulos, Veranzerou 22, ICCS, Greece
Helena C. Pereira, ICNAS, University of Coimbra, CIBIT - Coimbra Institute for Biomedical Imaging and Translational Research, Portugal
Gary Pickrell, Materials Science and Engineering, Virginia Tech, United States
Rafael F. Pinheiro, ciTechCare, Instituto Politécnico de Leiria, Portugal
Noureddine Raouafi, University of Tunis El Manar, Tunisia
Ihtesham Rehman, Lancaster University - Interactive Systems Laboratory, United Kingdom
Alexandre M. Rossi, Department of Condensed Matter, Applied Physics and Nanoscience, Centro Brasileiro de Pesquisas Físicas, Brazil
Shubhajit Roy Chowdhury, SCEE, Indian Institute of Technology Mandi, India
Wim C. Rutten, Neural Engineering/Biomedical Signals and Sytems/Faculty EE,Math and Comp.Science, University of Twente, Netherlands
Amir Sanati Nezhad, Independent Researcher, Canada
Pezhman Sasanpour, Medical Physics and Biomedical Engineering, Shahid Beheshti Medical University, Iran, Islamic Republic of
Michael J. Schöning, Institute of Nano- and Biotechnologies, FH Aachen, Germany
Wongwit Senavongse, Biomedical Engineering, Srinakharinwirot University, Thailand
Patrícia Severino, Tiradentes University, Brazil
Revati Shriram, Instrumentation and Control, Cummins College of Engineering for Women, India
Pitt Supaphol, Polymer Science, Chulalongkorn University, Thailand
Niall Tait, Electronics, Carleton University, Canada
Tong-Boon Tang, Institute of Health & Analytics, Universiti Teknologi PETRONAS, Malaysia
Marco Tatullo, Translational Biomedicine and Neuroscience, University of Bari, Italy
Angel A. J. Torriero, Deakin University, Australia
Nhiem Tran, RMIT University, Australia
Manolis Tsiknakis, Institute Of Computer Science, Foundation for Research and Technology Hellas (FORTH), Greece
John Tudor, Electronics and Computer Science, University of Southampton, United Kingdom
Abhishek Vaish, IIITA, India
Antonio Valente, INESC TEC (formerly INESC Porto)/ School of Science and Technology, UTAD University, Vila Real, Portugal
Duarte Valério, IDMEC, Instituto Superior Técnico - Universidade de Lisboa, Portugal
Júlio Viana, University of Minho, Portugal
Nuno Vieira Lopes, Polytechnic of Leiria, Portugal
Roman Viter, Optical biosensors and functional nanomaterials, Institute of Atomic Physics and Spectroscopy, Roman Viter, University of Latvia, Institute of Atomic Physics and Spectroscopy, Latvia
Giovanni Vozzi, department of Information engineering and Research Center "E. Piaggio", University of Pisa, Italy
Yi Yan Yang, Agency for Science, Technology and Research, Singapore
Mingming Zhang, South University of Science and Technology, China
Zhuo Zou, Fudan University, Sweden

(list not yet complete)

footer